PLOTTY Wooden Bed with Headboard and Front Safety Rail – 140 cm Wide
The 140 × 200 cm PLOTTY bed pairs a spacious sleeping surface with a slatted headboard and front safety rail. Choose from eight finishes to suit your child’s room.
Designed and made by Benlemi in the Czech Republic from solid spruce sourced from Czech forests. Benlemi specifies finishes suitable for children’s furniture and toys and lists ČSN EN 71-3 certification issued by TZÚS Praha, s.p.
- Sleeping size: 140 × 200 cm.
- Maximum load: 120 kg.
- Recommended for children aged 3 years and over.
- Recommended mattress thickness: 12–16 cm; maximum thickness permitted by the assembly instructions: 16 cm.
- The front safety rail can be fitted on the right or left side.
- Finishes: Unvarnished, Transparent oil, White, Beige, Pastel pink, Sage green, Light grey and Dark grey.
- For indoor use.
- Manufacturer’s warranty: 3 years.
Headboard height: 41 cm. Frame height: 14.5 cm. Outer dimensions below are length × width; sleeping dimensions refer to the mattress size.
- Sleeping size 140 × 200 cm: outer dimensions 207.5 × 147.5 cm; front rail length 127.5 cm.
The bed frame, one headboard, front safety rail and slatted bed base are included. BOTTY height-extension legs, the STORAGE drawer and the SLEEP pull-out bed are optional accessories sold separately. The mattress, bedding and decorations pictured are not included. Some gallery photographs show the rail removed or optional accessories fitted.
Follow the supplementary reinforcement instructions for this bed width. They show how to fit the centre support and the different support positions needed when using an optional storage drawer or pull-out bed.
Adult assembly is required. Follow and retain the supplied instructions, and keep small parts and packaging away from children. Do not use the bed if any structural part is damaged or missing; use only manufacturer-approved replacement parts. Keep the bed away from open flames and strong heat sources. Ventilate the room to prevent moisture build-up.
Before use, check edges and tighten the fastenings correctly. Inspect joints regularly and alter components only as instructed by the manufacturer. Clean with a damp cloth, then wipe dry. Avoid aggressive cleaners and solvents.